|
Type II
(Level 6)
Dahle Type II (Level 6) paper shredders
exceeds the security and performance standard of the RCMP
Destruction Standard and are recommended for a higher degree of
security. They have been tested and are listed on the RCMP Security
Equipment Guide to meet all the requirements of an approved Canadian
Distributor. Our Type II (level 6) models have been further endorsed
by the U.S. National Security Agency to reduce an 216mm x 279mm
(8-1/2" x 11") piece of paper into 16,000 particles 1mm x 4.7mm in
size (NSA/CSS Specification 02-01) and it is impossible to
reassemble any document you shred with these machines.
|
|
|
20434 DXC Deployment Shredder |
|
 |
- 1mm x 4.7mm Cross Cut - Security
Type II (Level 6)
- 240mm (9 1/2") Feed Width
- 4 / 6 Sheet Capacity
- Speed 4 m/min (13 ft/min)
- Motor 375 Watts (1/2 hp)
- Dimensions (H x W x D) 457
x 406 x 356 mm (18"
x 16" x 14")
- Solid Steel cutting head
- Slide out drawer to remove waste
- Mobility case is made of hard
plastic and lined with foam for protection
- Lockable case is airtight,
watertight, and corrosion proof
- Rolling casters and pull strap
is included and removable for transportation
|
|
20434 Small Office Shredder |
|
 |
- 1mm x 4.7mm Cross Cut - Security
Type II (Level 6)
- 240mm (9 1/2") Feed Width
- 4 / 6 Sheet Capacity
- Speed 4 m/min (13 ft/min)
- Motor 375 Watts (1/2 hp)
- 40 L (10 Gallon) waste volume
- Dimensions (H x W x D) 635
x 406 x 356 mm (25" x 16" x 14")
- Automatic on/off
- Chain driven providing slip free
power
|
|
20634 EC Office Shredder |
|
 |
- 1mm x 4.7mm Cross Cut - Security
Type II (Level 6)
- 260mm (10 1/4 ") Feed Width
- 6 / 8 Sheet Capacity
- Speed 8 m/min (26 ft/min)
- Whisper quite 746 watts (1hp motor)
- 64 L (16 Gallon) waste volume
- Dimensions (H x W x D) 763
x 426 x 394 mm (30-1/2" x 16-3/4" x 15-1/4")
- Fully electronic operation
- Chain driven providing slip free
power
- Single tier work rack included
- Automatic Oiler Ready
-
Just buy, attach, and fill
|
|
30434 Department Shredder |
|
 |
- 1mm x 4.7mm Cross Cut - Security
Type II (Level 6)
- 310mm (12") Feed Width
- 7 / 9 Sheet Capacity
- Speed 9.15 m/min (30 ft/min)
- 140 L (35 Gallon) waste volume
- Dimensions (H x W x D) 890
x 527 x 489 mm (35" x 20-3/4" x 19-1/4")
- Fully electronic operation
- Chain driven providing slip free
power
- Powerful 933 watts (1 1/4 Hp) continuous
duty motor
- Automatic Oiler Ready
-
Just buy, attach, and fill
|
|
20835 EC Department Shredder |
|
 |
- 1mm x 4.7mm Cross Cut - Security
Type II (Level 6)
- 405mm (16") Feed Width
- 5 / 7 Sheet Capacity
- Speed 6.1 m/min (20 ft/min)
- 140 L (35 Gallon) waste volume
- Dimensions (H x W x D) 851
x 648 x 432 mm (33-1/2" x 25-1/2" x 17")
- Fully electronic operation
- Chain driven providing slip free
power
- 746 watts (1 Hp) continuous duty
motor
- Single tier work rack included
- Automatic Oiler Ready
-
Just buy, attach, and fill
|
|
20834 EC
Department Shredder |
 |
- 1mm x 4.7mm
Cross Cut - Security Type II (Level 6)
- 405mm (16")
Feed Width
- 8 / 10 Sheet
Capacity
- Speed 10.7
m/min (35 ft/min)
- 140 L (35
Gallon) waste volume
- Dimensions (H
x W x D) 851 x 648 x 432 mm (33-1/2" x 25-1/2" x 17")
- Fully
electronic operation
- Chain driven
providing slip free power
- 1500 watts (2
Hp) continuous duty motor
- Single tier
work rack included
- Automatic
Oiler Ready
-
Just buy, attach, and fill
|
|
20394 High Capacity Shredder |
|
 |
- 1mm x 4.7mm Cross Cut - Security
Type II (Level 6)
- 405mm (16") Feed Width
- 9 / 11 Sheet Capacity
- Speed 10.7 m/min (35 ft/min)
- Powerful 1500 watts (2 hp motor)
- 200 L (50 Gallon) waste volume
- Dimensions (H x W x D)
(46-1/2" x 27-1/2" x 24")
- Chain driven providing slip free
power
- Fully automatic
|
|
Shred Size
1mm x 4.7mm Cross Cut
Type II (Level 6) |
Shred Sample |
|
(All performance data has been
established using #20/#16 bond 216 x 279mm
(8-1/2" x 11") paper.
Different paper
qualities may
yield different results.
Technical data subject to change.)
|
CRD DISTRIBUTION
INC.